Cat 6 U/UTP Outdoor Lan Cable Double Jacket

MODEL：OD9021

100MHz bandwidth is provided at a distance of 90 meters, with a typical application rate of 100Mbps，Up to 5GBASE-T is supported.
The product is widely used in outdoor horizontal workspace wiring, outdoor LAN wiring, overhead or wall laying.
outdoor environments such as short time of water and long time of sunlight and ultraviolet irradiation. The outdoor double sheath cable adopts PE waterproof outer sheath and PVC inner sheath, which has excellent waterproof performance and can be used in outdoor environments such as short time of water and long time of sunlight and ultraviolet irradiation.

Ref. Standard	ANSI/TIA 568.2-D, ISO/IEC 11801, YD-T1019, UL444

Typical Structure Parameters
Conductor Material	Conductor Diameter	Insulating Material	Insulator Diameter	Sheath Material	Outside Dia	Color
Oxygen-Free Copper	24AWG	HDPE	0.90±0.05	PVC + PE	6.20 mm	Black

Mechanical and Electrical Performance
Conductor Dc Resistance	93.8 Ω/km
Dielectric Strength Between Conductors	1.5KV ac for a minimum of 2s, without breakdown
Dc Resistance Unbalance Inside The Pairs	≤5%
Mutual Capacitance	≤5.6nF/100m

Application Scenario	Description & Compliance
Outdoor LAN Infrastructure	Optimized for generic outdoor Local Area Network (LAN) deployment and horizontal workspace telecommunication distribution paths requiring high-durability cabling.
High-Speed Gigabit Networking	Engineered for standard data transmission, providing a 100MHz bandwidth up to a distance of 90 meters with a typical application speed of 1000Mbps (Gigabit), and supporting up to 5GBASE-T networks.
Aerial & Wall-Mounted Routing	Perfect for overhead installations or mounting along exterior structural walls. The central internal Cross separator effectively maintains pair isolation and reduces internal crosstalk during long-term deployment.
All-Weather & UV Environments	Utilizes a rugged double sheath design (waterproof PE outer jacket paired with a PVC inner sheath) to provide long-lasting defense against intense solar radiation, ultraviolet rays, and open-air elements.
Wet & High-Humidity Sites	Equipped with high-performance waterproof sealing properties, making it highly reliable for installation in damp external pathways or areas prone to short-term water accumulation.
Standardized Engineering Layouts	Fully compliant with primary worldwide commercial and network standards, satisfying ANSI/TIA 568.2-D, ISO/IEC 11801, YD-T1019, and UL444 industry guidelines.

Instructions
Operating Temperature	-10~60°C		Construction Temperature	0~40°C
Recommended Bending Radius for Laying	≥5*OD		Recommended to Lay Tension	≤110N(Short-term) ≤20N(Long-term)

Packing	Optional, According to Customer Requirements to Discuss.

No documents available for this product.

Other Cables In This Category

型号 MODEL：IS9000

2GHz bandwidth is provided at a distance of 90 meters, with a typical application rate of 25/40Gbps.
Product selection of high quality oxygen free copper as the transmission conductor, electrical transmission performance is reliable and excellent, reach and exceed the eight categories of system indicators.
Compared with the single shield cable, the shielding effect is better, and it has stronger anti-electromagnetic interference ability, which is suitable for the occasion of strong external electromagnetic interference.

MODEL：IS9100

500MHz bandwidth is provided at a distance of 90 meters, with a typical application rate of 10Gbps.
Product selection of high quality oxygen free copper as the transmission conductor, electrical transmission performance is reliable and excellent, reach and exceed the seven categories of system indicators.
Each pair of wires uses aluminum foil topper and tinned copper wire braid net total shielding layer, which makes the resistance to external electromagnetic interference and resistance to crosstalk between the wire pairs quite excellent.

MODEL：IS9031

500MHz bandwidth is provided at a distance of 90 meters, with a typical application rate of 10Gbps.
The product is widely used in indoor horizontal work area wiring, indoor LAN wiring.
The product uses high quality oxygen-free copper as the transmission conductor, and adopts the center cross PE skeleton to separate 4 separate wire pairs to optimize the design of cable structure and electrical transmission.It can be reliable and excellent, reach and exceed the super six system indicators, provide rich margin support for the system link, and convenient construction and installation.